Testseek.de haben 51 Experten-Bewertungen der Arctic Freezer 13 CPU Cooler und die durchschnittliche Bewertung beträgt 83% erhoben. Blättern Sie nach unten und sehen Sie alle Beiträge zu Arctic Freezer 13 CPU Cooler.
December 2010
(83%)
51 Tests
Durchschnittliche Punktzahl von Experten, die dieses Produkt bewertet haben.
The Arctic Cooling Freezer 13 is not a monster cooler. It's not going to wow you with it's incredible cooling performance. It's not going to run completely silently. What it is going to do is provide you with cheap cooling performance, in a compact si...
Zusammenfassung: Rated for heat loads of up to 200W according to the manufacturer, the Arctic Cooling Freezer 13 is a relatively compact sub-130mm tall heatsink. It's 92mm fan utilizes fluid dynamic bearings and a low noise impeller design. ...
Now, it is important to note that the comparison Noctua costs close to twice as much as the mid $30 priced Freezer 13. When overclocked, that difference does indeed show up.With only the single fan that goes in one direction, the Freezer 13 is highly...
Easy Installation, Compatible with both Intel and AMD systems, Quiet 92mm PWM fan, Preapplied MX4 thermal paste, Excellent cooling solution relative to price, 6year warranty,
Tall RAM Heatsinks will not clear the first DIMM slot of some motherboards, 92mm fan is built into the fan holder and cannot be replaced individually, gold, Discuss this review in our forums
The Freezer 13 continues Arctic Cooling’s tradition of offering an affordable aftermarket cooling solution that performs just as well as some high-end coolers. The installation was easy and only took a few seconds to mount, but was sturdy and secure, ...
There's no sugarcoating it – other coolers perform better than the AF13. It isn't the worst, but it is certainly competent. Your overclocks should be ok with it. If you're looking for suicide runs and highest possible clocks for some short air benching...
The variety of heatsinks and fans is almost endless when you browse retailers like NCIX or Newegg. From opening the package where no scissors or knives were required to the push pins and two screw design, the Freezer 13 is downright easy to install. T...
Thermal compound pre-applied, came off when removing packaging, User manual doesn't have any text, Sub-par cooling, Some may not like the push-pin installation
Overall the Arctic Cooling Freezer 13 is a small and easy to install CPU cooler. It’s hard to say whether the results that we found were accurate, since we had issues with the thermal compound on the base. While this cooler does have an easy push-pin i...
Veröffentlicht: 2016-02-14, Autor: Gary , Testbericht von: gamegrin.com
Overall, I'm really pleased with this cooler. It was easy to install and has given me some good scope for overclocking. It's nice and quiet and it strikes a good balance between size and usability. It has a very specific look which is going to be a matter...
Zusammenfassung: COLOR=#000000] AMD and Intel have worked hard over the years to produce CPUs with smaller dies, increased transistor counts and reduced power consumption. Despite these improvements TDP (thermal design power) for desktop CPUs has remained in the 60-80w r...
Plastic blister packaging is re sealable, Universal fitting, Low fan noise, Budget price, Excellently performing fan and tower, 18oC lower temperatures than Intel Cooler.
Plastic pushpins and plastic threaded tower mount screw holes may deteriorate and fail if remounting regularly, Pushpins prone to splaying, No fan options. Can't mount alternative fans or dual fans, Cheaper probably more durable options available.
With the majority of cases now coming with CPU cut outs in the motherboard tray, allowing the mounting and removal of CPU coolers in-situ, the attraction of push pin mounting without the need for a back plate is decreasing.With most CPU coolers that ...
